HP Laserjet Pro 132a Setup Support
- HP LASERJET PRO M132a FIRST TIME PRINTER SETUP
- HP LASERJET PRO M132a DRIVER INSTALLTION
- HP LASERJET PRO M132a WIRELESS CONNECTION
- HP LASERJET PRO M132a MOBILE PRINTING
- HP LASERJET PRO M132a DUPLEX PRINTING
- HP LASERJET PRO M132a TROUBLESHOOTING
The latest and the most suitable driver for the HP Laserjet Pro 132a Setup is available on our website. To download and install the suitable driver for your Laserjet Pro M132a printer, click on the displayed link. You will be directed to the driver download page and there you can select and download the best driver for your printer.
Before you download and install the software for your printer, it is important that you have to check if it is compatible with your printer. The most suitable software for the HP Laserjet Pro 132a Setup is available on our website. You can quickly download the best and recent version software for your printer by clicking the link provided.
The latest user guide for the HP Laserjet Pro MFP M132a is available on our website. The User Guide provides all the basic information regarding the printer. user guide gives step-wise instructions and solutions regarding the printer related problems. Click the displayed link and download the user guide for your 123 hp printer.
HP Laserjet Pro 132a Setup First-Time Installation
The detailed instructions for the overall printer setup are given or explained in step by step procedure. Do as per the steps are given below accordingly and complete the printer setup.
HP LJPro 132a Setup Unboxing & Setting Up:
- You should remove the printer from the printer box and then remove the tape and packing materials from the printer’s outside. Then you must open the exterior door and remove all the packing material under the ink cartridge access door.
- You should now open the ink cartridge access door, and slowly remove or take out the cardboard box. Then remove all the packing material, and tape from the printer’s inside. Don’t discard the box as it contains important components.
- Now, open the box and you will find the ink cartridges, power cord, and the USB cable. Take them out one by one carefully and also check if all the items are there as listed because some contents might vary.
- After removing all the items from the box, you have to connect the power cord’s one end to the electrical outlet and the other end to the rear of the printer. Turn on the printer by pressing the power button.
- After you switch-on the printer, you must load enough paper into the paper tray to overcome printing issues and then slide the stack of paper down until it stops. Then to lift the tray extender, pull out the output tray.
- You must now install the ink cartridges to the printer. You can use the ink cartridges that shipped along with the printer. So open the cartridge access door and wait for some time till the carriage remains silent and idle.
- Slowly remove the new ink cartridge from its package and gently rock it back and forth to distribute the ink evenly on both sides. Insert the cartridge into its slot and gently push it forward till it clicks into place.
- After installing the ink cartridges to the printer, it aligns the cartridges and prints an alignment page. The cartridges must be aligned after the installation for good quality printing. To finish the setup you must download and install driver and software.
Easy Guidance for HP Laserjet Pro 132a Driver Installation
To download and install the best driver for your HP Laserjet Pro 132a Setup printer, just click the displayed link and you will be taken to the driver download page. There you can select the driver that is compatible with your printer. You can install the driver using the CD that shipped along with the printer.
- To install the latest version driver for your HP Laserjet Pro 132a Setup printer, you must take the CD or DVD that came or shipped along with the printer and insert it into the CD drive.
- When you insert the CD or DVD, a set or list of instructions appear on the screen and follow them accordingly to download and install the recent version HP Laserjet Pro 132a driver.You can also download and install the driver from our website.
- Click the link provided and you will be directed to the driver download page.
- Now, you must select “Download”.The driver will start downloading immediately after you click the “Download” option.Follow the instructions that appear.
- To install the driver, choose the “Open”, “Save”, or “Run” option.You have to double-click the driver file in the “Downloads folder” and should follow the instructions to complete the driver installation setup.The driver is downloaded to your computer.