How to Connect Laserjet Pro m203dw to Network 2018-11-27T09:15:47+00:00

How to Connect Laserjet Pro m203dw to Network?

If your printer does not get connected to your network, you cannot perform wireless functions. If your printer has been reset or password has been modified, the printer might not able to connect with the network and the old connection would be lost. You can establish a new connection to connect your printer to a new network. Learn How to Connect Laserjet Pro m203dw to Network Below:

Quick Steps for Connection b/w LJPRO m203dw & Network

  1.   Tap on the Wireless icon on your printer’s control panel.
  2.   Highlight the network that your printer is connected earlier.
  3.   Move to the computer that is connected to the Laserjet.
  4.   Go to System Preferences to examine the devices connected.
  5.   Choose the old network and “right-click” to remove the same.
  6.   Click the “wireless icon” on your printer by scrolling the list.
  7.   Know the credentials of the network that is SSID and Pass Phrase.
  8.   Enter the password and connect with the new network.
How to Connect Laserjet Pro m203dw to Network

How to Connect Laserjet Pro m203dw to Network?

  •   Select the Wireless icon on your printer’s control panel and select the network that your printer is connected earlier. The control panel has certain control keys. Locate the Wi-Fi Direct button and press the same. The display will show the Wireless icon if it is enabled.
  •   Remove your device from the computer and re-connect the same. Employ the WPS method and can connect your printer. 
  •   One is the WPS Push Button method, and other is called WPS PIN method. Before you start implementing this method, make sure your router includes Wireless Protected Setup button on it. 
  •   Press the WPS button on your printer for 120 seconds and then press the WPS button on your router. Enter the network name and password when the display prompts.
  •   Select the connection methods your printer supports. Download the updated version of the printer software and carry out the installation process.
  •   You can use the HP Auto Wireless Connect to connect your HP LaserJet M203D printer series. You don’t need any USB cables or other network credentials.
  •   Choose the Network connection type after installing software and tap Yes, send wireless settings to the printer.After this, the HP Auto Connect will do the remaining.
  •   If the above method is not successful, use the HP Wireless Setup Wizard method. Run the Wireless Setup Wizard using the printer’s control panel. This method is applicable only for the control panel with the touch screen.
  •   Connect with the printer, you must know the network name and the security password (WEP/WPA or WPA2). Open Go to the Network menu or tap the wireless icon and from the list of wireless network, identify your network.
  •   Enter it manually if the network’s name is unlisted. Enter the name properly. When the window prompts, enter the password. The printer would have got connected wirelessly. Above We Provide the Detailed Instructions for How to Connect Laserjet Pro m203dw to Network. still you have any doubt contact our experts.

123.hp.com printer guide