The 123.hp.com/dj5810 printer & its functions are generally controlled by a program called driver. The printer functions can be done if the driver communicates through the subsystem. If incompatible drivers are installed the operational issue occurs. The driver is required to carry out the printer functions properly. Get the driver installed on your computer based on the version of the OS.
The software plays a major part in the proper functioning of the printer. The good way of getting all the features out of your printer is installing the full featured driver. When the full featured driver is installed, scan and other software that come with a package. It is easy to install and manage. Check the guidelines to know the compatibility of the printer and its software.
A User Guide is must for most of the people for setting up any device using 123.hp.com/dj5810. It is a source where you can get all the required steps to be done. Be it a hp deskjet gt 5810 setup printer instructions or troubleshooting tips, Printer maintanance and guidelines everything is on your hand. The buyer of the product can have a platform to know about the hp printer.
HP Deskjet 5810 Setup First-Time Installation
Customizing the HP Deskjet GT 5810 printer is really simple provided the step-by-step procedure given below is followed. The first step you have to do after purchasing a printer is to unbox it.
Steps for HP DJ5810 First-Time Installation:
Once unboxing is completed, verify the items in the box. Ratify that you have the installation CD, power cord, cartridges, and user guidelines. Eliminate all the protective material, tape and stickers present around the printer.
Eliminate the sticker on the control panel of the printer. Carefully hold the handles on either side of the printer, elevate the ink cartridge access door until it fits properly into place. Eliminate all tape and packing material found in the printer.
Shut the ink cartridge access door and access the input tray door. Drag it towards you and extend the paper tray. Check for plastic tapes and remove them. Drag the input tray forward until it fits into place. Subsequently, close the input tray door.
Link one end of the power cord into an electrical outlet and the other end to the rear of the HP Deskjet GT 5810 printer. Power on the printer and choose your preferred language, country on the control panel of the printer.
If instructed, choose the date and time and then click Yes to save your choice. Access and pull the input tray door to extend the paper tray and then slide the paper width guides as much as it can.
Mount a stack of A4 size paper or U.S.Letter into the loading tray of the printer with the short edge forward and the print side down. Place the paper stack into the input tray and move the paper width guides so that they will place on the paper stack’s edge.
Now, move the input tray forward until it rests into place. Elevate the ink cartridge access door until it snaps into place. Hold on until the carriage displaces to the left and becomes stable before you continue.
Eliminate a new ink cartridge from its package. Grasp the ink cartridge by its sides with the nozzles toward the printer and then push the ink cartridge forward into the provided slot until a snap sound is heard. Shut the cartridge access door.
123.hp.com/dj5810 Driver Installation
Commonly, installing a 123.hp.com/dj5810 printer is easy. For many printer models the drivers that can be downloaded from the Windows updates. It can be installed from our website as well.
First, check your printer model and know the version of your computer’s operating system. The drivers vary with printer models.
Get directed to our website and tap Download Drivers. Pick out your Printers in the list and then key in the printer’s model number. Choose the download icon and the file will get downloaded.
Access the Downloads folder and double-tap the driver file. Tap Run and the installation will start.
Choose the USB connection option, when it is instructed at the time installation process.Once the installation of the printer driver is completed, access the Control Panel and tap Devices and Printers.
By doing this, you can see your printer in the Devices and Printers window.
You can also check whether the printer name is included to Printers and Scanners list in the System Settings. If your printer is not cataloged, then click Add a Printer and include your printer name to the existing list.
How to Send Fax?
The process of transmitting scanned texts or photos to any output device connected to a telephone line or a printer is made possible by faxing. By placing a document or photo into the fax enabled printer and following the prompts lets you transmit the scanned documents to another telephone connected device. Once the data reaches the receiver’s end, the exact copy of the actual document can be obtained.
HP Deskjet 5810 Printer Connection Support
HP DJ5810 Wireless Connection
Link the 123.hp.com/dj5810 printer to the network to customize the HP printer on a wireless (Wi-Fi) network and then install the latest printer driver and software from us.
Select Wireless as the connection type, when instructed at the time of installation.
Collect the network name and password, before customizing the printer on your wireless network.
Power up your 123.hp.com/dj5810 printer and keep it close to the computer so that they present within the acceptable range of the router at the time of the setup procedure.
De-link any Ethernet cable or USB from the printer.
From the home screen on the control panel of the printer , choose the Wireless button. Select the Setup icon and go on with the Wireless Setup Wizard option.
With the help of the Wireless Setup Wizard, link the printer to your network, so the HP installer can search the printer at the time of installation.
Choose your network’s name in the list of sorted networks and then click OK. If instructed, key in your WEP. Choose OK to revert to the home screen.
If a connection error occurs, verify if you have entered the uppercase and lowercase letters for the network name and password.
HP DJ5810 USB Connection
Uninstall already installed 123.hp.com/dj5810 driver versions from your personal computer to prep for the driver installation and USB connection setup.
Affirm the following requirements and items before you start the connection: Get a USB cable not more than 3 m in length.
If the USB cable is linked to the computer before installing the HP driver, proceed with the following procedure and exclude the printer from the installed device.Detach the USB cable that links your printer and computer.
Affirm that you don’t re- establish the USB cable connection until instructed.Find the devices option and then choose Devices and Printers from the list of results.Right-click the printer button, and then choose Remove device.
If multiple icons for the printer are present, eliminate them all.Close the Devices and Printers window, and then proceed to the next step.
Get directed to our website, key in your printer’s name and then trail the on-screen instructions to download the driver. Access the download file and commence the setup procedure.
When instructed by the installer to opt for a printer connection option, choose USB and continue with the prompts to complete the Installation process.
How to Print From Windows 10 Devices?
Place photo paper in the main paper tray of the 123.hp.com/dj5810 printer. While placing the paper the short edge of the photo paper has to be fed into the input tray first.
If the paper has a perforated tab for handling purpose, place the paper so the tab faces up or towards you to avoid printing on it.
The contrast, brightness, and color can be modified in the photo.
Right-tap the photo you’d like to print, select Open with and choose Paint.
For Windows 10, open the photo with Paint to use these steps.
Windows Photo Viewer does not come with Windows 10 and was replaced by the Photos app.
Click Print-> File/ the menu icon, then click Print. The Print or Print Pictures window opens with general print job settings.
Open the 123.hp.com/dj5810 printer Document Properties window to access more layout, quality, color, and advanced print settings. Change the following color and quality settings for best photo printing results.
After printing, remove the remaining photo paper from the input tray and store it in a plastic bag as the paper might start to curl.
If your computer monitor displays colors inaccurately, printed photo quality might be unsatisfactory. Try changing to the monitor’s default color settings.
HP DJ5810 Duplex Printing Support
DUPLEX PRINTING ON WINDOWS
Stack the input tray with enough blank paper to fully complete your print job. Open the document that you want to print, click File, then click Print.
Choose the name of your printer, then click Printer Setup. The Document Properties window will open.
In the Printing Shortcuts tab, select Print on Both Sides.
Unload the first side printed pages from the output tray, then load these printed first side pages into the main input tray.
The print driver will display a pop-up window on the computer with instructions on how to reload the paper in the input tray.
DUPLEX PRINTING ON MAC
Stack enough blank paper into the input tray, to avoid page ordering issues. Open the document you want to print, click File and then click Print.
Look for a Two-Sided selection box. If the Two-Sided option is available, your printer supports automatic duplexing. Select the checkbox next to the Two-Sided option.Select Layout from the unnamed menu.
At the center of the window, Choose long or short-edge binding from the Two-sided pop-up menu and then click Print.
Select Paper Handling from the unnamed menu at the center of the window and then select Odd Only from the Pages to Print menu. Click Print.
How to Print Photos from Mobile Devices?
Reach the Web Services Setup option on the control panel of the 123.hp.com/dj5810 printer and search for the Web Services menu. This option might vary liable to the printer model.
Just send an email of the document or photo you want to print to the printer. Affirm that your mobile is linked to a wireless network.
Ratify that your 123.hp.com/dj5810 printer is linked to the same wireless network your mobile is linked. The wireless light will be enabled and you can see this by getting directed to the printer’s control panel.
To permit your printer to communicate securely over the Internet with web-connected printing services, power on the Web Services option from the control panel of the printer.
On the printer’s control panel, tap on the HP ePrint button. If you are instructed to setup HP ePrint, click Enable and trail the on-screen prompts.
If a connected status prompt or Web Services Summary page screens, Web Services is already on. Tap Print Info to avail an information sheet.
The information sheet which is obtained has your printer’s email address. Trail the on-screen instructions and proceed to the next step.
Key in the printer’s email address in the To: column and enter a subject in the subject line. Attach the photo and send the email.
On your mobile device, access the ePrint application. To personalize your ePrint enabled printer for the first time, click on the plus sign which is present in the upper right hand corner. Index the email address of your printer and choose the Add button to enable it. Just email the document you’d like to print and your printer will print the same.
GOOGLE CLOUD PRINT
Make use if the Google Cloud Print option to print from any browser or computer, provided you have an account. To enroll your 123 hp printer name, affirm that you have Google Chrome on your personal computer. The print job can be successful, if the 123 hp printer and the computer are over the same wireless network.
Get quick and easy prints from your Apple devices to any network- enabled printer. Using this you can print from your Apple iPhone, iPad, iPod, and tablets. It is very simple to use and you can get your prints with just a few procedures. Use this application, save your time and effort you send to print photos from your Mac devices.
HP DJ5810 Troubleshooting Guidance
How to fix ePrint Issues?
Ratify that the 123.hp.com/dj5810 printer is switched on and linked to the Internet. Check if the Web Services is enabled. It is must to maintain the Web Services on at all times to print using the HP ePrint application.
Affirm that the printer firmware is up- to- date. If the firmware gets outdated, HP ePrint fails to work. Scrutinize for any blinking lights or error messages on the control panel of the printer.
Affirm that the appropriate printer email address is entered in the To: column. Affirm that you have entered some texts in the subject line. A blank email subject line lets the HP ePrint server to terminate the assigned print job.
Check if any error email is received on the email account you are trying to send. The files like encrypted, or password, Digitally signed protected documents are not compatible with HP ePrint.
The photos that you decided to send have a horizontal and vertical resolution of 100 pixels or higher. The total size of the email should not exceed 10 MB. The maximum of only 10 attachments is allowed per email.
Make use of the HP Connected to manage your ePrint jobs. Scrutinize the HP ePrint print history on HP Connected to affirm that your print job is in the print history queue.
How to fix Printer Offline Issues?
Download and run the HP Print and Scan Doctor scan and go on with the on-screen instructions. The 123.hp.com/dj5810 printer driver which is installed on your computer might be an out- dated one. Check for a new driver and get it installed.
Affirm that the appropriate port is chosen, if your printer is linked via USB. Update the firmware and proceed to the next step if the problem prevails.
Let your Deskjet GT 5810 printer prints a network configuration report from your printer and get the URL for EWS. Click the URL in the system that is linked to the network.
Create a manual IP address in the network tab and choose apply. Exclude the printer from the list of devices and include it again. Affirm that the printer is not set for offline use.
The default print driver might have altered from the driver you installed to another driver like a Web Services for Devices (WSD) driver with a very similar name.Alter the originally installed driver to be the default print driver.
How to fix Print Job Stuck in a Queue?
If the input power is not supplied to the 123.hp.com/dj5810 printer, the issue will occur. Affirm that the power cord is firmly linked to the printer, the wall outlet, and the power adaptor. Reboot the printer by using the power button, when the printer is on.
If communication between the printer and your computer was not regulated, the issue might occur and you have to reset the USB connection. Detach the USB cable from the printer and the computer and re- establish the connection after 10 minutes.The print job exists in the queue when the printer is in the offline mode
Hold on for your printer to come back to the online mode. Access the print queue window and ratify that the Pause Printing or Use Printer Offline option are deselected.When you tap on the Print icon in your software application.
It sends the print job to the default printer. Make sure that the printer you are using is set as the default printer.Reboot the printing software system files by excluding and installing the print driver again.
How to Resolve Paper Jam Issue?
First, eliminate any loose paper from the output and input tray of the printer. Push the power switch to power off the 123.hp.com/dj5810 printer.
Detach the power cord and hold on for the printer to cool.
Unlock the print cartridge door and remove the ink cartridges from their slots. Eliminate any torn pieces of paper that present inside the printer.
After you have removed all paper, remount the cartridges back into the printer. Subsequently, shut the print cartridge door. Reset the printer by using the power switch.
Once the printer is off, hold on for thirty seconds and then push the Power switch to power it on again. Push the paper width and guides to their outermost level.Eliminate any damaged paper and then feed the paper into the input tray.